|Light Source||White LED|
|Light Source Lifespan||100,000 Hours|
|Emitting Color||White 5000K|
|Overall Dimension (mm)||290mmx228mmx210mm|
CH-HT12/EL heliport flood light is a ground surface installation light. It’s used to lighten the surface of the heliport, ensuring the heliport surface illumination not less than 10 Lux, making the heliport sign easy to see and giving the landing heliport accurate guidance. Uniform illumination of the heliport allows the pilot to reduce eye glare as much as possible in short distance.
● The lamp cover adopts tempered glass with excellent impact resistance (IZOD notch impact strength: 90), thermal stability (service temperature can be 130℃), great transparency (available with a light transmission of up to 90%), auto-UV resistance, aging resistance and flammability rating in UL94V0.
● House adopts casting aluminum and coating process that has features of good light, water tightness, and shock and corrosion resistance.
● Light source adopts the international advanced LED featuring low power consumption, high efficiency and light source lifespan reaching 100,000 hr.. Color temperature is 5000K.
● Equiped with projection lens, the angle more accurate, and the light distribution curve flux is more reasonable, and in front have the lens hood, it could effectively reduce the glare influence to the pilot.
● The light with surge protection device (In 7.5KA/5 times, Imax 15KA) can be used in the harsh environment.
CM-HT12/EL Helipad Flood Light Instruction Manual:
Because this light is insert type, before Installation please fix the spool and lighting fittings in advance. (Reference the following picture)
Usage and Wiring Diagram:
The identification of the line, lamps with one three-core cable with the length of 1.2m: the brown and black wire are power line(Input power AC110V),and the brown wire is connected to the Live line(L), black wire connect to Null wire(N), the yellow-green wire is the ground wire(E).
● All the lines must be connected correctly, otherwise may damage the light. Please look at the mark and introduction carefully.
● The power supply of this type of light is AC110V、50HZ/60HZ. Do not use other power supply, such as 380V, otherwise the light will be quickly damaged.
● It is normal situation there will be a temperature rise when the lamps working.
● When the light working, in order to avoid the dangerous, pls don’t open any part of the light body
● Non-professional workers do not disassemble , once discovered ,shall not guarantee.